Attop X-PACK 17 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Drones Attop X-PACK 17. Attop X-PACK 17 5 páginas.
Imprimir página(4) Install phone clamp.
Put the phone clamp to specified position on the remote, and make sure
fasten the phone clamp.
6. Remote Controller
（2）
（4）
（6）
（8）
(1) Power switch
(2) Left joystick
(Altitude Control, L/R turning)
(3) Right joystick
(Movement Control)
(4) Left function switch
(Take off/Landing, Emergency stop)
(4) Activate motors for taking-off.
After pairing, push the Left Joystick to the top, then release to activate motors,
then the propellers start rotating.
(5) Take off / Land.
Take off: After activating motors, press "Left function switch"
(or keep pushing up the Left joystick slowly) to take off.
Land: When the drone is in the air, press "Left function switch"
(or keep pushing down the Left joystick slowly) to land.
In case of emergency status,
keep pressing "Left function switch"
about 3 seconds, the drone will
immediately stop functions and
drop off.
（1）
（3）
（5）
（7）
（9）
(5) Right function switch
(Headless mode, Return)
(6) Take photo
(7) Video
(8) Speed switch
(9) 360° Stunt
4
OR
Emergency Stop
6
7. How to Fly
(1) Switch on the power.
First power on the drone.
1
(Keep pressing for 2-sec
and place it on a flat ground
or surface.)
(2) Pair.
1
2
(Pic 1)
(3) Gyroscope calibration
(Pic 2)
8. Using the Remote Controller
Left Stick
Up / Down
Turn left / Turn Right
9. Aircraft Functions
Adjustment for deviating flying to Front/Backward
(1)
Vertically press the Left Joystick again for deactivating adjustment fucntion,
after finishing adjustment.
Adjustment for deviating flying to Sideward
(2)
Vertically press the Left Joystick again for deactivating adjustment fucntion,
after finishing adjustment.
Power on the Remote.
2
After powering on the drone, both indicator
lights on the drone and Remote are flashing,
then push the Left Joystick to the top, and
then down to the lowest (Pic 1). After 2 secs,
the indicator lights are turning solid,
which means the pairing succeeds.
Push the Left joystick to right corner and the
Right joystick to left corner at the meantime
(Pic 2). The indicator lights of the drone are
flashing rapidly for about 3 seconds. The
indicator are turning solid when completed.
5
Right Stick
Forward / Backward
Left-sideward / Right-sideward
Vertically press the Left Joystick for
activating adjustment fucntion.
If it leans front, push the Right Joystick to
backward.
If it leans backward, push the Right Joystick
to forward.
Vertically press the Left Joystick for
activating adjustment fucntion.
If it leans right sideward, push the Right
Joystick to left side.
If it leans left sideward, push the Right
Joystick to right side.
7