Attop X-PACK 3 Manual de operação - Página 2
Procurar online ou descarregar pdf Manual de operação para Drones Attop X-PACK 3. Attop X-PACK 3 5 páginas.
Imprimir página5. How To Fly
(1) Switch On the Power
First power on the drone
1
(Keep pressing for 2-sec
and place it on a flat ground
or surface.)
(2) Pairing
After Powered On the drone, both indicator
lights on the Drone and Remote are flashing,
1
then push the Left Joystick to the top, and
2
then down to the lowest (Pic 1). After 2 secs,
the indicator lights are turning solid,
that means the pairing succeed.
(Pic 1)
(3) Gyroscope Calibration
Push Left Joystick to right corner and Right
Joystick to left corner at the meantime (Pic 2).
The indicator lights of the drone are flashing
rapidly for about 3 seconds. The indicator are
turning solid when completed.
(Pic 2)
6.Using the Remote Controller
Left Stick
Up / Down
Turn left / Turn Right
7. Aircraft Functions
Adjustment for deviated flying to Front/Backward
Vertically press Left Joystick again for deactivate adjustment fucntion,
after finished adjustment.
Adjustment for deviated flying to Sideward
Vertically press Left Joystick again for deactivate adjustment fucntion,
after finished adjustment.
Power on the Remote
2
4
Right Stick
Forward / Backward
Left-sideward / Right-sideward
Vertically press Left Joystick for activate
adjustment fucntion.
If it leans front, push Right Joystick to
backward.
If it leans backward, push Right Joystick to
forward.
Vertically press Left Joystick for activate
adjustment fucntion.
If it leans right sideward, push Right
Joystick to left side.
If it leans left sideward, push Right
Joystick to right side.
6
(4) Activate motors for taking-off
After pairing, push the Left Joystick to the top then release to activate motors,
then the propellers start rotating.
(5) Take off / Landing
Take off: After activated motors, press "Left function switch"
(or push up the Left Joystick slowly) to take off.
Landing: When the drone in the air, press "Left function switch"
(or keep pushing down the Left Joystick slowly) to land.
In case of emergency status,
keep press "Left function switch"
about 3 seconds, the drone will
immediately stop functions and
drop off.
360° Stunt Function
1
1. Press the 360° Stunt
2. Push the stick to right, the drone will rotate 360° toward right direction
1
1. Press the 360° Stunt
2. Push the stick to top, the drone will rotate 360° toward front direction.
1
1. Press the360° Stunt
2. Push the stick to left, the drone will rotate 360° toward left direction.
1
1. Press the 360° Stunt
2. Push the stick to bottom, the drone will rotate 360° toward back direction.
Note:
* There are continuous beeps from the remote when you activate this function.
If you do not move the Right Joystick about 5 seconds after you press the 360°
Stunt switch, the function will be cancelled and the remote will stop beeping.
* This function can't be activated when the battery of the drone is low.
OR
Emergency Stop
5
2
360°
flip
2
2
360°
flip
2
7