dtm MICRO2 868 Manual de instalação e montagem - Página 11
Procurar online ou descarregar pdf Manual de instalação e montagem para Recetor dtm MICRO2 868. dtm MICRO2 868 12 páginas. 2-channel radio receiver
Imprimir página2.12. Memory format.
To format the memory of the receiver, press and hold for 15 seconds C1 and C2 buttons. Release buttons when the LEDs are
off.
1
Fig.15. Memory format.
Memory format:
removes all remotes from the receiver,
h
disable easy remote registering function,
h
removes authentication code ofGalactic function,
h
disable the service lock,
h
sets the operating mode of channels to monostable with activation time 1s.
h
2.13.Verifying the number of added remotes
In order to check the number of remotes added to the receiver's memory, after adding or deleting a remote, hold down the
receiver button for approx. 5 more seconds. LED will blink, indicating the number of programmed remotes. First LED
indicates the number of tens (from 0 to 20 long pulses), then the number of digits (0 to 9 short pulses). Example showing
pulses of added remotes is shown in Fig. 16.
Fig. 16. Example of pulses of 46 remotes.
2.14. Receiver management viaUSB
TThe receiver is equipped with a USB connector for connecting MEMO service programmer. Receiver housing is equipped
with aUSB socket cover (Figure 1.) which allows connecting MEMO programmer without a need to remove receiver cover.
Receiver communication with the programmer is signaled byG/LOCK LED.
Connecting MEMO service programmer to receiver allows:
receiver firmware update,
h
receiver memory backup,
h
add remotes from a file to the receiver memory.
h
During the backup and update of the remotes using the MEMO programmer receiver remains inactive, it does not respond
to the signal from the remotes.
In case of activated service lock, receiver cooperation with the programmer is not possible.
DTM System
spółka z ograniczoną odpowiedzialnością spółka komandytowa
2
PRESS AND HOLD C1 I C2
BUTTONS
number of tens - 4x10
> 15s
3
ALL LEDS BLINK
C1, C2, MOM, MONO, BIST
number of digits - 6
AFTER 15 SECONDS
LEDS GOES OUT
- FORMAT COMPLETED