ATX Maxnet II QMP200 Manual de instalação e operação - Página 13

Procurar online ou descarregar pdf Manual de instalação e operação para Amplificador ATX Maxnet II QMP200. ATX Maxnet II QMP200 20 páginas. Return rf/if

Imprimir página

STATUS MONITORING FEATURES

4.
Status Monitoring Features
4.1.

SNMP Parameters

Display Name
Model
Description
Name
Alias
Manufacturer
Asset I.D
Serial No
Hardware Rev
Firmware Rev
Temperature [C]
Alarm Detection Control
Fan Unit Status
Display Name
Voltage In [Volt]
Current In [mA]
Power In [Watts]
RF Amp Output
Description
RF Amp Output Level
[dBmV]
MAXNET
II – QMP200 Return RF/IF Amplifier Manual – Installation & Operation Manual
®
Description
ATX model number (note, in empty slots you can enter
passive, dual-passive, or empty to populate the overview
page with passive picture placeholders).
Description of the module.
Indicates the slot of the chassis the module is in.
Optional user defined field - added to fifth variable binding
of traps and emails
e.g. set this to "Node 69" for a given Receiver and any
alarms generated by this receiver will have "Node 69"
in the description. Otherwise, it would only contain the
IP address of the chassis, the Model and Name (slot
number).
ATX
Optional user settable field (suggestions: enter in a
custom serial number or purchase order # for tracking).
Module's serial number.
Hardware rev of module.
Firmware rev of module.
Module's current heatsink temperature.
detectionEnabled: normal operation, with active alarms
detectionDisabled: used to temporarily disable alarms/
traps from this module
detectionEnabledandRegenerate: enter detectionEnabled
state while regenerating all alarm table entries
Alarm status of the fan.
Table #8: Common Module SNMP Parameters
Description
Measured voltage supplied to the module from the
chassis (nominally 24V).
Current taken from the 24V rail by the module.
P.S. Voltage * P.S. Current
Description of the approx gain value of the amp.
Composite RF level at output of amp.
Table #9: QMP200 SNMP Parameters
CHAPTER 4: STATUS MONITORING FEATURES
HMS MIB Variable
entPhysicalModelName
entPhysicalDescr
entPhysicalName
entPhysicalAlias
entPhysicalMfgName
entPhysicalAssetID
entPhysicalSerialNum
entPhysicalHardwareRev
entPhysicalFirmwareRev
heCommonTemperature
heCommonAlarmDetectionControl
heFanUnitAlarm
HMS MIB Variable
hePsUnitVoltageIN
hePsUnitCurrentIN
hePsUnitPowerIN
heRFAmpOutputDescription
heRFAmpOutputLevel
4-1