ATX DYNANO2E Manual de instalação e operação - Página 5

Procurar online ou descarregar pdf Manual de instalação e operação para Conversor de multimédia ATX DYNANO2E. ATX DYNANO2E 18 páginas. Dvis series nano-sized digital video insertion system rf output

Imprimir página

SAFETY

Safety

WARNING! FAILURE TO FOLLOW THE SAFETY PRECAUTIONS LISTED BELOW MAY RESULT IN PROPERTY DAMAGE

OR PERSONAL INJURY. PLEASE READ AND COMPLY WITH THE FOLLOWING:

WATER AND MOISTURE: Care should be taken to prevent entry of splashed or dripping water, other liquids, and physical

objects through enclosure openings.

DAMAGE: Do not operate the device if damage to any components is suspected.

POWER SOURCES: Only connect the unit to a power supply of the type and capacity specified in the operating instructions

or as marked on the device.

GROUNDING OR POLARIZATION: Electrical grounding and polarization means must not be defeated.

POWER CORD PROTECTION: Route power supply cord to prevent damage by external objects. Pay particular attention to

the exit point from the device and plug.

FUSING: If your device is equipped with a fused receptacle, replace only with the same type fuse. Refer to replacement text

on the unit for correct fuse type.

SERVICE: Do not attempt to service the device beyond procedures provided the operating instructions. All other servicing

should be referred to qualified service personnel.

MODIFICATIONS: Modifications should not be made to the device or any of its components for applications other than those

specified in the operating instructions.

SAFETY CODES AND REGULATIONS: The device should be installed and operated in compliance with all applicable local

safety by-laws, codes and regulations.

MDU Solutions

– DVIS Nano - Nano-sized Digital Video Insertion System RF Output – Installation & Operation Manual

CHAPTER 1: SAFETY

1-1