Auber Instruments SYL-3615 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Controlador Auber Instruments SYL-3615. Auber Instruments SYL-3615 5 páginas. Wi-fi bbq controller
Também para Auber Instruments SYL-3615: Manual de instruções (7 páginas)
Imprimir página
AUBER INSTRUMENTS
Important tip: Your phone may recognize that the wireless signal from SYL-
3615 has "no internet access" and may want to switch to use mobile data or a
different Wi-Fi signal. If your phone prompts such a notification bar on the top
of the screen, please tap on it and select YES to stay connected.
h)
Once you tap on the CONFIRM button, the SSID and
password will be sent to the SYL-3615 so that it can log on to
your 2.4 GHz Wi-Fi.
i)
If the pairing process is successful, the SYL-3615 will re-start
and the blue LED will turn to solid-on. That means the device
has been connected to your router. In the meantime, the App
will return to the Device List page and a new SYL-3615 will
appear on this page.
j)
If the pairing process is unsuccessful, the App will remain on
the Add Device page. Please try again, and making sure you
check if the SSID is the desired wireless signal you want to
connect, if the password is correct, and wait a little bit long at
step (g) till the "no internet access" notification appears.
4. Programming a cooking profile
4.1. Single-step mode
By factory default setting, the SYL-3615 is initially set a single-step mode
with set-temperature at 225° F, which means the controller will try to
maintain pit temperature at 225° F indefinitely.
Note: In single-step mode, the Start and Stop function in the "P-Status"
(Program Status) parameter do NOT work.
To change the set temperature in single-step mode, short-press the SET
key on a SYL-3615 to bring up the cooking-profile menu. Move the
cursor to "Step:1" and press SET key to enable editing the value. When
finished editing the set value, press SET key again to save the value.
Press the BACK key to return to the normal operating mode.
P-Status: Step-1
>Step: 1
Figure 6. Move the cursor to Step 1 to edit the set value in the
single-step mode.
4.2. Enable multi-step mode
To enable the multi-step cooking profile, please go to the System
Configuration menu and change the parameter PRG to ON.
>PRG:
OL Detect
Figure 7. Change PRG to ON to enable the multi-step mode.
2020.11
Pit: 225
ON
ON
4.3. Multi-step cooking profile
You can program up to 6 steps in a cooking profile. In each step, there
are 4 parameters involved in this step: pit temperature, ending criteria,
step timer, or food temperature. The table below describes how the
settings in each parameter affects execution of a cooking step. The chart
in Figure 8 describes how the parameters in a cooking steps affects the
cooking process.
Name
Range
Description
The set value of pit temperature of the current
Pit
-99° F ~ 999° F
step.
To end the current step when food probe
Food Temp
reading reaches a desired temperature.
Ending
Time
To end the current step by cooking time.
To end the entire cooking. The rest of steps in
End
this cooking profile will be ignored.
0:00 ~ 23:59
Cooking time, if the current step will end by
Timer
(hh:mm)
"Time".
Target food temperature, if the current step
Food
-99° F ~ 999° F
will end by food temperature.
Start
Step x
Pit
Ending?
Cooking
Time
Food
Temp.
Timer
Step (x+1)
End
Figure 8. Flow chart on how the parameters of a cooking step
WWW.AUBERINS.COM
Determine the desired pit
temperature of this step
How do you want to end
this step?
End the
program
Enter step
time or
Food
target food
temp.
works.
P3/5