3onedata PS5026G-2GS-24PoE Manual de instalação rápida
Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor 3onedata PS5026G-2GS-24PoE. 3onedata PS5026G-2GS-24PoE 3 páginas. Managed poe ethernet switch
Imprimir página
PS5026G-2GS-24POE
Managed PoE Ethernet Switch
Quick Installation Manual
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the switch for the first time.
1.
Switch x 1
2.
Quick installation manual
3.
CD
4.
Power line x 1
5.
Mounting kit x 1
6.
Warranty card
7.
Certification
If any of these components are damaged or lost, please
contact our company or franchisers, we will solve it ASAP.
【Product Overview】
The product is a managed rack PoE Ethernet switch. Model is
PS5026G-2GS-24POE (2 Gigabit SFP slots + 24 Gigabit PoE
copper ports).
【Panel Design】
Main view
Top view
Rear view
Side view
1.
Device power supply connection status indicator
2.
Copper port connection status indicator
3.
PoE power supply output status indicator
4.
SFP port connection status indicator
5.
Restore factory defaults button RESET
6.
10/100/1000Base-T(X) PoE copper port
7.
Console port
8.
1000Base-SFP slot
9.
Grounding screw
10.
AC power supply input socket
11.
Installation location hole of the rack mounting lug
12.
Fan air-vent
【Mounting Dimension】
Unit: mm
Notes before mounting:
Don't place or install the device in moist area or near
water, keep the relative humidity of the device
surroundings between 10%~90% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after operating;
please don't directly contact to avoid scalding.
【Rack Mounting】
Mounting the device
Step 1
Select the device mounting position to ensure
enough size.
Step 2
Adopt 8 screws to install mounting lugs on the left
and right side to the position as the figure below.
Step 3
Place the device in the cabinet; adopt 4 screws to
install mounting lugs on the left and right side on
the cabinet.