daltile 1048BRS Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Serra daltile 1048BRS. daltile 1048BRS 20 páginas. Professional tile saw
Imprimir páginaBlade Guard
Water Pump
Cutting Table
Detachable Legs
This sawing machine is designed and inten-
ded for the professional contractor. The
machine is equipped with a saw head which
moves horizontally along a guiding beam.
The material to be cut is positioned on the
saw table. The saw must be fed through the
material. Through continuous supply of coo-
ling water the cutting quality is improved as
well as the wear on the saw blade is mini-
mized. The cooling water also absorbs the
saw dust. The quality and construction of this
sawing machine meet the highest standards.
The design is based on longevity and mini-
mal maintenance.
The stainless steel construction contributes to
a stable, rigid and durable sawing machine.
The 4 detachable legs are to be installed in
the leg sockets at the underside of the water
container and fastened with the knobs.
MACHINE SPECIFICATIONS
Saw Spindle
Cutting Head
The cutting head is constructed of cast alloy
components. The height adjustment is kept
in balance with a spring. A knob secures the
cutting head at the desired height.
Blade Guard
The Blade Guard is a welded steel plate cap.
Saw spindle
The spindle flange is mounted on the saw
spindle. The saw flange is to be mounted on
the saw spindle with a hexagon nut to clamp
the saw blade.
Cutting table
The cutting table is constructed of welded
stainless steel components, equipped with
anti-slip rubber and adjustable side stop.
Cooling system
The electrical water pump is switched on
simultaneously with the saw motor and sup-
plies cooling water to both sides of the saw
blade. A drain hole, with a plug, is located in
the water container. Mud flaps prevent most
of the water mist and make sure most water
flows back in the water container.
Technical Data:
Type ................................DALTOOL 1048BrS
Motor. ....................................................2 HP
Blade diameter/Arbor ..................10" / 5/8"
Cutting height ................................. max. 2"
Saw spindle speed .......................3.360 RPM
Cutting length .........................................48"
Length .....................................................61"
Width ......................................................18"
Height (without legs) ..............................25"
Weight .............................................124 lbs
Noise level .................................... 80 dB (A)
Noise level during sawing ............ 90 dB (A)
DALTOOL 1048BrS OPERATING MANUAL V02/2008R1 PAGE 11