3onedata TNS5800 Series Manual de instalação rápida - Página 3
Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor 3onedata TNS5800 Series. 3onedata TNS5800 Series 3 páginas. Layer 3 rack-mounted industrial ethernet switch
Também para 3onedata TNS5800 Series: Manual de instalação rápida (4 páginas), Manual de instalação rápida (4 páginas), Manual de instalação rápida (5 páginas), Manual de instalação rápida (4 páginas)
Imprimir página
LED
Indicate Description
Blinking 1 time per second,
Blinking
system is running normally
The
Ethernet
ON
established
connection.
LINK(1-8,
The Ethernet interface is in a
Blinking
G1-G12)
network activity state.
The
Ethernet
OFF
established
connection
【Logging in to WEB Interface】
This device supports WEB management and configuration.
Computer can access the device via Ethernet interface. The
way of logging in to device's configuration interface via IE
browser is shown as below.
Step 1
Configure the IP addresses of computer and the
device to the same network segment, and the
network between them can be mutually accessed.
Step 2
Enter device's IP address in the address bar of the
computer browser.
Step 3
Enter device's username and password in the login
window as shown below.
Step 4
Click "Login" button to login to the WEB interface of
the device.
Note:
interface
has
The default IP address of the device is "192.168.1.254".
a
valid
network
The default username and password of the device is
"admin123".
If the username or password is lost, user can restore it to
factory settings via management software; all modified
port
has
not
configurations will be cleared after restoring to factory
a
valid
network
settings, so please backup configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
Gigabit M12
100M M12
Console port
Alarm interface
Indicator
Switch Property
Backplane bandwidth
10/100/1000Base-T(X),
M12(Female), 8-Pin X-Coded,
Automatic Flow Control, Full/half
Duplex Mode, MDI/MDI-X
Autotunning, support Bypass
10/100Base-T(X), M12(Female),
4-Pin D-Coded, Automatic Flow
Control, Full/half Duplex Mode,
MDI/MDI-X Autotunning
CLI command line management
port (RS-232), RJ45
8-pin 5.08mm pitch terminal
blocks, relay occupies 2 pins
and 1 relay alarm information
output is supported, the current
load capability is 1A@30VDC or
0.3A@125VAC
Power indicator, alarm indicator,
running
indicator,
interface
indicator
128G terminal
Packet buffer size
12Mbit
MAC Address Table
16K
Power supply
Power input
110VDC(66~156VDC)
Dual power supply redundancy,
anti-reverse connection
Connection Mode
8-pin 5.08mm pitch terminal
blocks (power supply occupies 6
pins)
Power consumption
Full-load
＜20W
Working Environment
Working temperature
-40～75℃
Storage temperature
-40～85℃
Working humidity
5%～95% (no condensation)
Protection grade
IP40 (metal shell)