Conair 157XQICC Manual de instruções e de estilização - Página 4

Procurar online ou descarregar pdf Manual de instruções e de estilização para Secador de cabelo Conair 157XQICC. Conair 157XQICC 8 páginas.

Imprimir página

ADDITIONAL INFORMATION

FOR DUAL-VOLTAGE DRYERS

For use in North America, the voltage selector

switch should be placed in the 125 position.

For use in several countries overseas, the volt-

age selector may need to be placed in the 250

position. Confirm the voltage available at each

overseas location before using the appliance.

For connection to a 250 volt supply, use an at-

tachment plug adapter of the proper configu-

ration for the power supply receptacle.

FOR 110-125 VOLT OPERATION

Flick the dual voltage switch to the 125 posi-

tion. In this position, the dryer operates in all

available heat and speed settings.

FOR 220-250 VOLT OPERATION

First put the HI-LO switch into LO. Flick the

dual voltage switch to the 250 position. At

220-250V while set at LO, the dryer operates

only at high speed with high heat. Do not at-

tempt to operate the HI-LO switch or change

to 125 position when operating on 220-250V.

The switches must be set and remain in the

LO and 250 positions. A plug adapter may be

necessary in certain countries.

Blocked or clogged air intake will cause the

dryer to overheat. If overheating occurs, an

automatic safety device will shut the dryer

or the heat off to prevent damage or personal

injury. If the unit or the heat cycles off, unplug

the cord and allow the dryer to cool for 10 to

15 minutes before restarting. Make sure the

air vents are clean.

USER

MAINTENANCE

Your dryer is virtually maintenance free. No

lubrication is needed. For proper operating

performance, the dryer must be kept clean.

Blocked or clogged air intake vents will cause

the dryer to overheat. When cleaning is needed,

unplug the cord, and clean dust and lint from air

intake openings with a small brush or the brush

attachment of a vacuum cleaner. The outer sur-

face of the dryer should be wiped clean with a

damp cloth only.

CAUTION

NEVER allow the power supply cord to be

pulled, twisted, or severely bent. Never wrap

the cord tightly around the dryer. Damage will

occur at the high flex point of entry into the

dryer, causing it to rupture and short. Inspect

the cord frequently for damage. Stop use im-

mediately if damage is visible or unit stops or

operates intermittently.

If the cord or dryer is damaged or does not op-

erate properly, return it for repair to the nearest

service center. No repairs should be attempted

by the consumer.

STORAGE

When not in use, your dryer should be discon-

nected and stored in a safe, dry location, out of

reach of children. Do not wrap line cord around

dryer.