Conair Weight Watchers WW71C Manual de instruções de utilização - Página 10
Procurar online ou descarregar pdf Manual de instruções de utilização para Balanças Conair Weight Watchers WW71C. Conair Weight Watchers WW71C 17 páginas. Bathroom scale
Imprimir página
4. Note: If you attempt to set up a user number that is already in use, the display
will flash the word "dAtA". If you press the SET button, you will overwrite the
existing user data. All existing data will be lost. If you press another user button,
you will proceed to that profile to enter your data. If you do nothing, the scale
display will time out in 30 seconds and no data is overwritten or lost.
SETTING A PASS CODE
1. To protect your personal data, your Weight Watchers scale is equipped
with a pass code feature.
2. The display will flash "C" until a pass code is entered or the SET button is pre s s e d .
3. If you do not wish to set a pass code for your user number, press the SET
button. The scale will then enter the height setting mode (below).
4. To set a pass code, use the user buttons marked 1, 2, 3, and 4 to enter a 4-digit
pass code (for instance: 1232 or 4431, etc). Each time a user button is pressed, the
number appears and blinks on the screen. If you accidentally press the wrong num-
b e r, you can keep re-entering numbers until you have the desired 4-digit pass code.
P ress the SET button to accept your 4-digit code. The pass code becomes stable.
5. The scale is now ready to enter your height.
SETTING HEIGHT
1. The height indicator "HT" and inch symbol flash if your scale is set to
measure in pounds; if it is set to weigh in kg, the height will be measured
in cm.
2. Press the up or down arrows in the middle of your button array to scroll to
the correct height. Pressing and holding either the up or the down arrow
advances the numbers more quickly.
3. Press SET to accept the height. Height number becomes stable.
4. Your scale is now ready to enter the age-setting mode.
SETTING AGE
1. "AGE" appears on the display and the default age 30 flashes.
2. Press the up or down arrows in the middle of your button array to scroll to
the correct age. Pressing and holding either the up or the down arrow advances
the numbers more quickly.
3. Press SET to accept the age. Age number becomes stable.
4. Your scale is now ready to enter the gender setting mode.
SETTING GENDER
1. A gender icon (female/male) appears on the display and flashes.
2. Press the up or down arrows in the middle of your button array to switch
to the other gender.
3. Press SET to accept the gender. Gender icon becomes stable.