AIRTUG TT-M-EA-3 Instruções de montagem e funcionamento - Página 2
Procurar online ou descarregar pdf Instruções de montagem e funcionamento para Equipamento agrícola AIRTUG TT-M-EA-3. AIRTUG TT-M-EA-3 4 páginas. Trailer tugs
Imprimir páginawww.airtug.com
Loading: Position the ball on the tug under the receiver of the trailer and stop. Then either crank the
trailer down onto the tug (Manual) or push the button to raise the ball up into the receiver and lift the
tongue of the trailer up into the air (Automatic). Do not hold the button when the cylinder is maxed
out on stroke. This can cause damage to the cylinder motor and electronic circuits.
Operating Instructions
Step 1: Prior to the first use, plug the charger cable
into a 110V outlet or extension cord and charge the
batteries fully as indicated by the green light at the top
of the charger. The orange light indicates batteries are
charging. Keep the battery charger plugged in between
use. See the battery charger manual for more
information.
Step 2: If you purchased the "Surge Brake By-Pass",
plug in the trailer electric to the plug on the tug labeled
"Surge Brake By-Pass" and this will not allow the
brakes to lock up when pushing the trailer in reverse.
Step 3: Turn switch at end of handle to the "On" position. Select "FWD" or
"REV" and slowly press the thumb throttle to slowly begin movement of
the tug. Begin movement as slowly as possible.
2