ADDER ADDERLink INFINITY 2100 Início rápido - Página 2

Procurar online ou descarregar pdf Início rápido para Extensor ADDER ADDERLink INFINITY 2100. ADDER ADDERLink INFINITY 2100 2 páginas.
Também para ADDER ADDERLink INFINITY 2100: Início rápido (2 páginas)

Imprimir página

Connections

Main status indicators

Green

All services present.

Amber

Running but video, USB or network link missing.

Red

Booting before processor loaded or failed.

Red rapid flash

Critical error has been detected (a message will

also be displayed within the OSD.)

Blue

Factory reset mode active.

Red/green flash

Booting into factory recovery mode.

Green/blue flash

Upgrade mode active.

Fast green flash

Identify mode active.

Teaming

ALIF units are ready to automatically invoke teaming whenever the

CATx and SFP (with either CATx or fiber modules installed) ports are

both used to link transmitters and receivers. Teaming potentially

doubles the available bandwidth for video intensive applications and

also provides redundancy in case one link is lost.

* The units benefit from multiple audio signal streams:

• Uni-directional analog audio - from the host

PCs jack socket,

• Uni-directional digital audio - via the video

connection,

• Bi-directional digital audio - via the USB

connection (converted to/from analog).

To perform a manual factory reset

A factory reset returns ALIF unit to its default configuration.

1 Power on the ALIF unit.

2 Use a long narrow implement (e.g. a straightened-out paper clip) to press-and-hold the recessed

reset button on the front panel for roughly ten seconds, until the status indicator turns blue (Note:

alternating red/green indications will occur during the ten second period while the button is still pressed).

3 Release the reset switch. The indicator will change to red for a short while (less than ten seconds)

and then back to blue while ALIF unit performs the reset and should then change to an alternative

color, usually orange initially, signifying that the operation is complete.

Note: If you are performing a factory reset and intend to disconnect the power immediately after the reset,

you must wait at least 30 seconds after you have released the reset button for it to complete the process.

Note: The images shown here

are for ALIF2100. ALIF1100

units are slightly different in

appearance but connect and

operate in the same way.