Conairphone TAD2018 Manual do Proprietário - Página 13
Procurar online ou descarregar pdf Manual do Proprietário para Atendedor de chamadas Conairphone TAD2018. Conairphone TAD2018 17 páginas. Callkeeper digital answering system
Imprimir páginaPROBLEM
POSSIBLE CAUSE
No remote
Unit is in the "OFF" position
operation
AC adaptor is disconnected
from wall outlet or back of
unit
Power to electrical outlet
may be off
Calling from a phone that is
not outputting tone dialing
(rotary, PABX, cellular).
Telephone line is not
connected to wall jack
Security code not entered
correctly
Remote security code being
used differs from the code
on the bottom of unit
After a power
A 9 volt battery has not
outage, greeting
been installed or needs
and incoming
to be replaced
messages are
lost
The machine
The outgoing greeting
beeps during the
you are recording is too
recording of my
long
outgoing
greeting
The machine is
The incoming message
cutting off
is too long
incoming
messages
CORRECTIVE ACTION
Check to verify if message
counter is lit.
Reconnect AC adaptor into wall
outlet or back of unit. Try connecting
to a different wall outlet.
Check to see if electrical outlet
is controlled by a light switch
and power is on.
Try calling your unit from a
different (non-PABX,
non-cellular) phone.
Connect telephone line into wall
jack. Try connecting into a
different telephone wall jack.
3 digit remote security code
must be entered after your
greeting.
Press and hold each digit
for more than 1 second.
Verify that the remote secutity
code being used matches the
code on the bottom of the unit.
Install a fresh, alkaline 9 volt
battery to maintain your
greeting and incoming messages
in the event of a power failure.
Record a shorter outgoing
greeting (less than 30
seconds).
Maximum recording time for
incoming messages is 45 seconds.
13