Dan D'Agostino Relentless Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Dan D'Agostino Relentless. Dan D'Agostino Relentless 14 páginas.
Imprimir página
Front indicators are illuminated but you hear no sound
Follow these steps in order. If one step succeeds in restoring the sound, stop there and ignore the
other steps.
1.
Check your amplifier and source device to make sure they are both turned on.
2. Check the source device to make sure it is playing, and that the correct input is selected
on the preamplifier.
3. Make sure the preamplifier is not muted. If the displays are flashing, the preamplifier is
muted. If the displays are flashing, the preamplifier is muted. Press the front panel or
remote control mute button to disengage remote.
4. Check the line-level connections between the source device and the preamplifier,
and between the preamplifier and the amplifiers. Reconnect any cables that may have
become disconnected.
5. Check the cables between the amplifiers and the speakers to make sure they are properly
connected and that the cables have not become damaged.
6. Substitute an alternative set of interconnect cables between the source device and the
preamplifier and between the preamplifier and the amplifier. If this restores sound,
replace the defective cables.
7. If all of these steps fail to restore sound, consult your dealer for service.
Sound comes from only one channel
Follow the below steps in order. If one of these steps succeeds in restoring the sound, stop there and
ignore the other steps.
1.
Push the Balance button on the remote to see what the balance setting is. If the needles
on the front dials are moved to one side or the other, hold the Balance button on the
remote down for 2 seconds. The needle will return to the center as will the sound.
2. Check the interconnect connections between the source device and the preamplifier and
between the amp and preamplifier to make sure all cables (and XLR-to-RCA adapters, if
you're using them) are securely connected.
3. Check speaker cable connections for the malfunctioning channel. Reconnect any cables
that may have become disconnected. Inspect the cable to make sure it has not been
damaged. If it has been damaged, replace it.
4. If you are using monoblock amplifiers, such as the Relentless Amplifier, make sure both
amplifiers are turned on.
1 8
5. Swap the left-channel interconnect cable from the preamplifier to the amplifier with the
right-channel interconnect cable. If the malfunctioning channel now works but the other
channel does not, replace the defective interconnect cable with one of the exact same
type. You may have to replace both right and left cables to make sure they match.
6. Swap the left-channel interconnect cable from the source device to the preamplifier with
the right-channel interconnect cable. If the malfunctioning channel now works but the
other channel does not, replace the defective interconnect cable with one of the exact
same type. You may have to replace both right and left cables to make sure they match.
7. Try using a different source device. If the alternate source device delivers sound in both
channels, it is likely the original source device is defective. Consult the manufacturer of
that source device or your dealer for further information.
8. If possible, try using a different amplifier. If the alternate amplifier delivers sound in both
channels, it is likely the original amplifier is defective. Consult the manufacturer of the
amplifier or your dealer for further information.
9. If all of these steps fail to restore sound, consult your dealer for service.
Preamplifier functions but the remote control does not
Follow these steps in order. If one step succeeds in restoring the operation of the remote, stop there
and ignore the other steps.
1.
Make sure the Relentless Preamplifier remote is charged. Place the remote on the
included wireless charger to recharge the batteries.
2. Check to make sure the Bluetooth® antenna is securely fastened to the back of the
Relentless Preamplifier.
3. If these steps fail to restore operation of the remote, consult your dealer.
1 9