ADDER AdderLink LPV154T Manual - Página 12
Procurar online ou descarregar pdf Manual para Extensor ADDER AdderLink LPV154T. ADDER AdderLink LPV154T 18 páginas. Signage video extender
Imprimir páginaCascade connections
Where more remote video displays need to
show the same output from the host system,
it is possible to cascade up to three transmitter
units to provide control for a total of up to
twelve screens.
Cascading these units is a simple case of
connecting the video output of the first
transmitter to the video input of the next one;
with each transmitter able to drive up to four
video displays. It is recommended that you
cascade no more than three transmitter units
as there will be a slight degradation in signal
quality with each cascade link.
To connect multiple transmitters in cascade
1 Connect the supplied video cable to the socket labelled
the first transmitter (the one linked to the host system).
2 Attach the other end of the video cable to the socket labelled
on the next transmitter.
3 Optionally, repeat steps 1 and 2 for a third transmitter.
4 Make CATx links between each transmitter and its related
receiver modules as usual.
CATx LINKS
VIDEO IN FROM HOST
VIDEO OUT
LPV154
POWER
CASCADE
LINK
CATx LINKS
VIDEO IN
VIDEO OUT
LPV154
POWER
on
Video in from
host system
Video link cable
(as supplied with
each transmitter
or available as
an extra item:
VSC18)
4 3
2 1
4 3
2 1
Optional
cascade
output to next
transmitter
Links to
receiver
modules
Links to
receiver
modules
11