ADDER AdderLink X-DVI Manual - Página 7
Procurar online ou descarregar pdf Manual para Extensor ADDER AdderLink X-DVI. ADDER AdderLink X-DVI 15 páginas. Digital video and usb extenders
Imprimir páginaConnections at the remote module
Video connection
1 Connect the DVI/D lead from the video monitor to the DVI output socket of
the remote module.
DVI/D connector
from the monitor
USB connection
1 Connect the leads from the keyboard and mouse to the two USB sockets on
the remote module.
Type-A USB connectors
from the keyboard and
mouse
Link connection
1 Attach one of the supplied ferrite cores to the link cable, next to the
connector. This is necessary to ensure compliance with the European EMC
directive and FCC regulations.
2 Connect the link cable (see page 2 for cable advice) to the remote module
socket labelled
.
TO LOCAL
RJ-45 connector of
the CATx link cable
Supplied ferrite core
See the
3 If necessary, use video compensation to overcome the effects of long cable
lengths on the video signal - see page 7 for details.
Power connection
1 Connect the output lead of the
supplied power adapter to the
socket labelled '
' on the
POWER
remote module.
2 Insert the IEC connector of
the separate power lead
into the corresponding
socket of the power
adapter. Connect the
other end of the power
lead to a nearby mains
socket.
3 After all connections are
made, power up the
monitor and remote
module and then switch
on the computer.
INSTALLATION ADVICE
on page 4
Output lead from
the power adapter