3onedata IES3012G-4GS Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Router de rede 3onedata IES3012G-4GS. 3onedata IES3012G-4GS 4 páginas. Industrial ethernet switch

Imprimir página

The switch top panel provided 4 bit power supply input terminal

block, support DC input. DC power supply input supported

redundancy function, provided PWR1 and PWR2 power input,

can use for single, and can connect 2 separately power supply

system, use 1 pair terminal block connect the device at the same

time. If one of the power systems broke, the device can work

un-interruptible.

Built-in

overcorrect

connection protection. Voltage input range is 12 ～ 48VDC

（terminal block defined as: V1-、V1+、V2-、V2+）.

Important notice:

1. Power ON operation: first of all, insert power cable's terminal

block into device's power port, then insert power supply plug into

power source

2. Power OFF operation: First off all, unpin power plug, then

strike the terminal block, please take care of operation sequence.

【Dimension】

Unit (mm)

【Communication connector】

10/100/1000BaseT(X) Ethernet port

The pinout of RJ45 port display as below, connect by UTP or STP.

The connect distance is no more than 100m. 1000Mbps is used

120Ω of UTP 5e; 100Mbps is used 120Ω of UTP 5; 10Mbps is

used 120Ω of UTP 3, 4, 5.

RJ 45 port support automatic MDI/MDI-X operation. That can

protection,

Reverse

connect the PC, Server, Converter and HUB. Pin 1, 2, 3, 4, 5, 6, 7,

8 Corresponding connections in MDI. 1→3, 2→6, 3→1, 4→7,

5→8, 6→2, 7→4, 8→5, are used as cross wiring in the MDI-X

port of Converter and HUB. In MDI/MDI-X, 100/1000Base-TX

PIN defines is as follows:

Note：10Base-T/100Base-TX, "TX±"transmit data±, "RX±"receive data±,

"—"not use.

10/100Base-T(X) MDI (straight-through cable)

MDI

MDI-X

BI_DA+/TX+

BI_DB+/RX+

BI_DA-/TX-

BI_DB-/RX-

BI_DB+/RX+

BI_DA+/TX+

BI_DC+/—

BI_DD+/—

BI_DC-/—

BI_DD-/—

BI_DB-/RX-

BI_DA-/TX-

BI_DD+/—

BI_DC+/—

BI_DD-/—

BI_DC-/—

- 2 -

10/100Base-T(X) MDI-X (Cross over cable)

Gigabit MDI (straight-through cable)

Gigabit MDI-X (Cross over cable)

MDI/MDI-X auto connection makes switch easy to use for

customers without considering the type of network cable.