Danatronics ECHO 7DL Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Instrumentos de medição Danatronics ECHO 7DL. Danatronics ECHO 7DL 9 páginas. Thickness gages
Imprimir página
Batteries
ECHO Series Thickness Gages come standard with a rechargeable Li-Ion battery located on the
back of the gage under the door with the screw. Fully charge your unit before using by plugging
the USB cable into the top of the gage and to the included AC wall adapter.
When charging, the F4 key will light up blue. The blue light will turn off when fully charged.
Allow up to 10 hours for a full charge.
When the gage is turned on, there is a battery indicator on the bottom right hand corner of the
screen showing the % battery life remaining
1. Powering ON/OFF
To power on the unit, press and hold the F1 key for more than three seconds. The LCD will briefly
display the company information and then the Transducer Setup selection screen will appear as
shown below. To turn off the unit, press and hold the F1 key for about three seconds.
Note: If the gage is set up for left hand operation, the F1 and F4 display prompts will be reversed.
Ver: 2.0
2