Elite Acoustics D6-8 Manual rápido - Página 4

Procurar online ou descarregar pdf Manual rápido para Altifalantes Elite Acoustics D6-8. Elite Acoustics D6-8 5 páginas. Elite acoustics engineering live-performance studio monitor with 6 channels, digital mixer & effects, and bluetooth

Imprimir página
Power LED:
BLUE [1]: Indicate unit is ON
+48V LED [2]: Indicates Phantom Power is on
Monitor Output Controls
Speaker Volume [3]: Control speakers' volume level
Mono [4]: Changes speaker output to Mono sound
Equalizer [5]: Adjust High, Mid, and Low Frequency response
Peak LED [6]: RED indicate Signal Clip
Signal LED [7]: GREEN indicate Signal Present
Aux Input/Level [8]: Connect audio source with 1/8" jack from MP3/CD player
Channel 1
Gain [9]: Gain level control
PAD [10]: Fixed attenuation to reduce input level
Source[11]: Select Mic/Line or Instrument input
Instrument In [12]: 1/4" TRS inputs
Line In [13]: 1/4" TRS inputs
Mic In [14]: XLR for Microphone Input
Channel 2
Gain [9]: Gain level control
PAD [10]: Fixed attenuation to reduce input level
Source[11]: Select Mic/Line or Instrument input
Instrument In [12]: 1/4" TRS inputs
Line In [13]: 1/4" TRS inputs
Mic In [14]: XLR for Microphone Input
Channel 3
Gain [9]: Gain level control
PAD [10]: Fixed attenuation to reduce input level
Line In [13]: 1/4" TRS inputs
Mic In [14]: XLR for Microphone Input
Channel 4
Gain [9]: Gain level control
PAD [10]: Fixed attenuation to reduce input level
Line In [13]: 1/4" TRS inputs
Mic In [14]: XLR for Microphone Input
Channel 5/6
Level [15]: Level control
Left (Mono) [16]: 1/4" mono TR input
Right [17]: 1/4" mono TR input
Aux
Aux Send Level [18]: Aux output level control
Aux Send 1 [19]: 1/4" TR output
Aux Send 2 [20]: 1/4" TR output
Monitor Output: Connect with extra speakers/monitors
Monitor Right Output [21]: Connect to another speaker using 1/4" TRS
Output Source [22]: Select either Main Mix or Direct Output for Chan 1 & 2
Main Output [23]: XLR Left/Right Output
MIDI: MIDI IN/OUT [24]: 5 PIN DIN connectors for MIDI controllers
Battery Switch[25] : Built in Circuit Breaker to preserve battery life.
Connect: Enable battery power when using unit
Disconnect: Disable battery power when storing unit to preserve battery life
Refer to reference page for features listed above
BLUETOOTH® FUNCTION
•
To turn ON/OFF Bluetooth® function
PRESS/HOLD down MODE button for approximately 5 seconds
Both LEDs will flash at the same time
•
To pair device to the speaker system
Bluetooth® needs to be turned ON
QUICK TAP the MODE button once
Both Flashing LED: indicate Bluetooth
Flashing Blue LED only: indicate Bluetooth
TO FULLY CHARGE SPEAKER SYSTEM
1.
Put power switch in the "OFF" position and Battery Switch in the "Connect"
position
2.
Plug in power adaptor into the DC input jack
3.
Blue "Charge" LED will turn on, indicating the speaker is charging
4.
When the speaker is fully charged, the blue "Charge" LED will turn off
•
Recharge after every use
•
Use & recharge battery at least once a month
•
DO NOT leave power switch in the "ON" position when it is not
in use. Doing so after a long period of time will damage the
battery
•
Keep unit in a cool, dry place away from extreme
temperatures
•
Do not service, modify, or replace the battery
•
If the battery fails to charge, contact Elite Acoustics Designs
is ready to be paired
®
is connected
®
FOR MAXIMUM BATTERY LIFE