Elite Acoustics Engineering A4-58 Manual de início rápido - Página 12
Procurar online ou descarregar pdf Manual de início rápido para Amplificador Elite Acoustics Engineering A4-58. Elite Acoustics Engineering A4-58 13 páginas. 120w lithium battery powered acoustic amplfier with 4 channels, mixer, effects, and bluetooth
Speakers:
8" Woofer; 5 1/4" woofer, 1" Silk-dome Tweeters
Optimized front ports for extended low-frequency response
Frequency response 63Hz - 19k Hz
Cabinet: MDF or Plywood.
Amplifier:
120 Watts Ultra High-Efficiency Class D Amplifier.
EQ Controls:
Low
Mid
High
Notch
Battery:
Built-in Lithium Iron Phosphate (LifePO4) type, rechargeable
Typical recharge time ~ 5.5 hours
Play time ~ 4 to 6 hours
Power Supply:
DC 12V, 5000 mA
Physical:
• Dimensions: 15.30"WX13.1"Hx9.80"D
• Weight: 28 lbs
•
•
Nominal output level (1 kHz): Right Channel Link out: -10 dBu Main/Direct Output: +4dBu
•
Channel controls: CH1 & 2: EFX Send Level knob, Gain knob, Mute switch, Phase, Pad Notch
Filter,Frequency, & EQ(Channel 1 EQ includes Mid Frequency) CH3/4: Level Knob & EFX Send
Level
•
EFX Effect controls: Dry/Wet knob, Decay/Rate knob, 16 different effects(Bright/Dark Cavern,
Bright/Dark Hall, Bright/Dark Room, Bright/Dark Plate, Ambience1, Ambience2, Echo, Repeat
Echo, Echo/Rev1, Echo/Rev2, Chorus, Flange)
•
Master controls: Volume Knob, Mono Switch, Equalizer (Low, Mid, High knob), Effect Mix, Decay/
Rate, Effects
•
Stereo Inputs: 1/4" Left/Right input jacks
•
Phantom Power: +48V
•
Aux in control: Level knob
•
Indicators: signal clip, power, +48V, EFX Bypass, Bluetooth
•
Connectors: CH1 & 2: Input jacks (XLR type, 1/4" TRS phono type), CH3/4: Left/Right stereo input
(1/4" TRS phono type), AUX in: input jacks (1/8" jack), Right channel output: line out jack Right
(XLR type), DC in jack
•
Power Switch
•
Other features:
Playback from Bluetooth device
USB charging dock
Optimized front ports for extended low-frequency response
Built-in pole-mount, 35mm receptacle on bottom of unit
+9V DC output (500mA)
•
Accessories: AC cord, AC adaptor, Optional DC cord for the car
•
Unit can operate normally when plug into the Car Adaptor.
•
Battery can also be charged by using the Car Adaptor.
•
It is not recommedate that you leave the unit plugged in while car is not running.
SYSTEM SPECIFICATIONS
+/- 12dB @ 50Hz (shelving)
+/- 12dB @ 200Hz – 4k Hz (resonant)
+/- 12dB @ 10k Hz (shelving)
+/- 12dB @ 80Hz – 400 Hz (high-Q resonant)
CAR ADAPTOR "OPTIONAL"
®