Elite Core IM-16 Manual do utilizador - Página 14
Procurar online ou descarregar pdf Manual do utilizador para Sistema de altifalantes Elite Core IM-16. Elite Core IM-16 20 páginas. Personal monitoring system
Imprimir página
Elite Core PM-16 User Guide
Master Controls
MASTER Level
The MASTER knob sets the overall level sent to the headphone output and LINE OUT connectors.
If both headphones and the monitors are connected, set the appropriate headphone level first then
adjust the monitor amp to be compatible.
NOTE:
Always check the listening level before putting on headphones. We recommend keeping the channel LEVEL con-
trols lower than the MASTER.
COMPRESSION Level
Turning the COMPRESSION knob clockwise increases the compression ratio. The output automatically
compensates for gain reduction.
The signal is not compressed when the knob is turned fully counterclockwise.
Graphic EQ Sliders
Lo, Mid, and Hi frequency bands can be boosted or cut 12 dB.
Center the sliders to the detented position for a flat response.
AMBIENCE Level
The AMBIENCE knob sets the PM-16's built-in mic level.
The AMBIENCE mic can reduce the isolated feeling some musicians experience when using IEMs be-
cause they can hear:
•
the "room sound;"
•
conversation not spoken into a mic;
•
instruments playing in the room but not present in the mix.
LEDs
The two columns of LEDs to the left of the MASTER level knob indicate the post-EQ stereo output level.
If either red clip LED lights, we recommend reducing your output level to preserve headroom. The clip
LED lights 3 dB below actual clipping.
The red LED to the right of the output LEDs lights when the PM-16 is connected to a power source,
either from the DM-8 or its own power supply.
14