Airuno Amadeus Instruções de instalação e do utilizador - Página 8
Procurar online ou descarregar pdf Instruções de instalação e do utilizador para Campânula de ventilação Airuno Amadeus. Airuno Amadeus 12 páginas. Recirculating ceiling hood
Imprimir página4.3.2 Controls
The Amadeus is controlled by remote control. This
allows the user to control the hoods on/off
functions and motor speeds.
Turns motor on at speed 2 and for turning the
motor off.
Increases motor speed.
Decreases motor speed.
Turns lights on.
Timer button for turning the motor off after 10
minutes.
The extractor has a timer incorporated to remind
the user to clean the grease filters. A red light
indicates the filters need cleaning. To reset this
press and hold the power button on the extractor
until the red light goes off.
5. Use & Maintenance
Before beginning any sort of cleaning or
maintenance work, turn the power off to the hood
by turning the main switch to 0 (OFF).
5.1 Changing the Light Bulbs
LED spotlight replacement should only be carried
out by qualified technicians using only original spare
parts.
5.2 Cleaning the Metal Filters
The metal filters fitted in the hood should be
washed every 2-3 months, depending on how much
the hood is used, using hot water and a liquid
detergent that is not too aggressive.
The metal filters can be removed by the special
handle, unhooking the front part of the filter and
pulling it downwards (Fig 12).
Fig 11
5.3 Carbon Filters
The hood can be used with carbon filters which
traps the cooking smells. These are either polyester
or long life carbon filters and these are situated
behind the grease filters.
5.3.1 Polyester Carbon Filters
These cannot be reused or washed and must be
periodically changed (every 4 months if the hood is
used for 2 hours every day). Saturated filters could
be a fire hazard. The filters in the Amadeus are
rectangular.
5.3.2 Long Life Carbon Filters
These can be cleaned and reactivated. The filter
should be cleaned every other month if used
normally. The filter is best cleaned in a dishwasher
at the highest temperature using normal washing
detergent. The filter should be washed on its own to
prevent particles of food fastening in it and then
causing an unpleasant smell later on (Fig 13).
To reactivate, the carbon filter should be dried in
the oven. Choose upper/lower heat and maximum
100°C and dry the filter for 10 minutes (Fig 14). The
filter must be changed when it no longer absorbs
the cooking smells sufficiently.
Fig 12
Fig 13
8