Ducati 1098R 2008 Instruções de instalação - Página 3

Procurar online ou descarregar pdf Instruções de instalação para Controlador Ducati 1098R 2008. Ducati 1098R 2008 5 páginas. Dynojet power commander iii usb

Imprimir página
i736-411
www.powercommander.com
Unplug
Stock connector
PCIII connectors
Stock connector
8
Unplug the stock wiring harness from
the rear injectors (Fig. E).
These injectors are located on top of
the air box.
To remove the connector you must
first remove the spring clip. This is
best done with a pick or small
screwdriver.
9
Plug the GREEN colored wires from
the PCIII in-line of the stock injector
and GREY connector.
Plug the BLUE colored wires from
the PCIII in-line of the stock injector
and BLACK connector (Fig. F).
Make sure to reinstall the spring clip
on the stock connectors.
10
Use 1 of the small supplied zip ties to
secure this connection to the fuel line.
Make this connection as compact as
possible.
11
Unplug the stock wiring harness from
the front injectors (Fig G).
This connection is very difficult to
access. It is best to get to thru the
front of the bike directly above the
radiator.
Figure G was taken from the front of
the bike with the radiator dropped
from its frame mounts.
2008 Ducati 1098R - PCIII USB - 3