Anybus Wireless Bridge II Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Adaptador Anybus Wireless Bridge II. Anybus Wireless Bridge II 17 páginas.

Configuration

4.4

MODE Button

The MODE button can be used to restart or reset the unit as well as for selecting

Easy Config modes. See

► When the unit is powered on, press and hold MODE for >10 seconds and

then release it to reset to the factory default settings.

► Press and hold MODE while applying power to boot into Recovery Mode.

Recovery Mode can be used to reinstall firmware using an external applica-

tion if the web interface cannot be accessed. Please refer to the support

website for more information.

Recovery Mode LED Indications

In Recovery Mode the LEDs will indicate firmware update status.

PWR

WLAN + BT

Anybus

Wireless Bridge II

Easy Config, p.

Firmware updates should normally be carried out through the web

interface. Recovery Mode should only be used if the unit is unresponsive

and the web interface cannot be accessed.

Green

Green, blinking

Alternating red/blue

™

Installation Guide

10.

Firmware update in progress

Waiting for valid firmware

Firmware update in progress

SCM-1202-013/SP2167 1.1

12 (16)