AnyDATA ACT611 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para GPS AnyDATA ACT611. AnyDATA ACT611 13 páginas. Wcdma vehicle tracker

HANDING THE

4.1 S

1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which

is located within 2 feet of the steering wheel.

2. The installation is very easy, just put the ACT611 to the OBD-II

connector in user vehicle.

3. The ACT611 will power on automatically from vehicle battery and start

initiation for WCDMA network access.

4. After install of device to vehicle, all services are served by server.

4.2 P

OWER SUPPLY FROM VEHICLE

1. After insertion of ACT611 to OBD-II connector, the device has

automatically power-on with the car battery, typically 9~18V.

2. If the engine has off, then the device decide to power off the OBD

interface

unauthorized movement function.

If the engine has on, then the device work on the OBD interface

circuit, which is charge of gathering the vehicle information such

as fuel gauge, speed, engine RMP, and so on to report it to LBS

server via the WCDMA network.

GPS L

EHICLE

OCATOR

(

TYPICAL

circuit,

and

VEHICLE TRACKER Users Manual (ACT611)

13.5V)

run

the

WCDMA

with

GPS

for

10/13

the