ADDER AdderLink X100 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Recetor ADDER AdderLink X100. ADDER AdderLink X100 19 páginas. Extender set
Também para ADDER AdderLink X100: Manual do utilizador (19 páginas)
Imprimir página
Installation & Operation
Connections
Installation of the X100 modules is straightforward and minimal configuration
requirements in most cases. The moulded CAM (Computer Access Module)
connects directly to the system, while the remote X100 module is at the other
end of the twisted pair cable and attaches to the keyboard, mouse, etc.
Connections.at.the.CAM.(local).unit
•
Connections.at.the.X100.(remote).module
•
Cable length advice
The X100 modules support twisted-pair structured cabling within categories
5, 5e and 6. Of these three cable types, category 5 generally provides the best
transmission of video signals because its four pairs of conductors are the most
evenly twisted.
Category 5e and 6 cables use conductor pairs that are unevenly twisted in order
to combat interference effects encountered within higher frequency networks.
While these uneven twists work well for Ethernet signals, they can impose
problems for the video signals transceived by the X100 modules. The X100
modules send the red, green and blue video signals on separate twisted pairs
within the cable. If any of the colour signals are made to travel slightly further
or shorter distances than the others, the result is seen as mis-aligned colours on
screen. This is called skew and becomes more noticeable as cable runs become
longer and screen resolutions/refresh rates increase.
As an approximate guide, you should expect the following maximum cable
lengths (achievable at resolutions up to 1600 x 1200 @ 60Hz):
Category 5
Category 5e or 6
100m ¹
50 to 100m ¹
¹ length limited by skew in the cable.