ADDER DVA Início rápido - Página 2

Procurar online ou descarregar pdf Início rápido para Conversor de multimédia ADDER DVA. ADDER DVA 2 páginas. Digital video adapter

Imprimir página

Connections

The Adder DVA requires no drivers or special

settings to operate; simply plug and play.

DVI output to

video display

Upgrade and reset modes

Note: When the DVA is in upgrade mode, the video going through it is disabled, so you are recommended to connect it to a USB port on a different PC. On the side of

the DVA module, you will find a small hole and a recessed indicator. These are used to invoke special functions. Use a thin implement, such as a straightened

paperclip to press and hold the button concealed behind the smaller hole. Depending on when you release the button, the module will either perform a

normal reset, enter upgrade mode or completely reset itself to factory defaults:

Time (in seconds): 0

Indicator

Release button

Normal reset

The DVA will report itself as a USB memory stick labelled 'Firmware'. The upgrade file is a binary file that you drag and drop into the DVA's 'Firmware' entry within your

computer's file manager; whereupon the file transfer process will commence. Once the file transfer has completed, the DVA needs to be rebooted by either pressing the

reset button again to bring it out of upgrade mode or alternatively the USB lead can be disconnected and reconnected. The current firmware version can be determined using

the Adder VCP app (a Windows app available for download from www.adder.com).

Web:

Contact:

Support:

Part No. MAN-QS-DVA-ADDER_V1.1a

Flash

Enter upgrade mode

www.adder.com

www.adder.com/contact-details

www.adder.com/support

VGA input

from

computer

USB input

from

computer

Rapid flash

Reset to factory defaults

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date

of original purchase. If the product should fail to operate correctly in normal use during the warranty period, Adder will replace or repair it free

of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder's control. Also Adder will not be responsible for

any loss, damage or injury arising directly or indirectly from the use of this product. Adder's total liability under the terms of this warranty shall in

all circumstances be limited to the replacement value of this product. If any difficulty is experienced in the installation or use of this product that

you are unable to resolve, please contact your supplier.

Optionally using the USB socket

If required, you can plug a USB peripheral, such as a mouse or keyboard, into

the spare USB socket on the DVA. However, ensure that the peripheral does

not draw more current than 100mA, otherwise the operation of the DVA

module could be affected.

Note: The Adder DVA can be connected into

a USB 3.0 connector as well as the

standard USB 2.0 connector.

However, there is no USB

3.0 operation, the

USB feed through

runs at USB 2.0

HS data rates.

From USB

peripheral

Normal reset

Use paperclip to

press and hold

the button

Indicator