Duco DucoBox Silent 400 Manual de instalação - Página 7
Procurar online ou descarregar pdf Manual de instalação para Ventilador Duco DucoBox Silent 400. Duco DucoBox Silent 400 12 páginas.
Também para Duco DucoBox Silent 400: Manual de início rápido (16 páginas), Manual de instalação (16 páginas)
Imprimir página
06.B Installer / User mode
To add components to the network, remove or replace, the system should be put in 'Installer mode'� The LED on each component
indicates the active mode of the component (see table in next section)�
'Installer mode' can be activated by pressing the DucoBox Silent 'INST' button (see drawing in section "04�A Connections & but-
tons" on page 5�) Once the LED on the master unit starts flashing, it means that 'Installer mode' is active� Press 'INST' again to
return to 'User mode' (LED fully on or off)� The system reverts automatically to 'User mode' after 15 minutes of inactivity�
06.C LED indications
YELLOW (clignotement rapide)
Transitional phase (please wait)
The system is not working correctly because the DucoBox has not been calibrated� Restart the
06.D Setting type of home
Setting the type of home and number of occupants correctly will provide the ventilation system with a better basis to adjust the
mid-position� There are two types of home: low-rise (e�g� a house) and high-rise (e�g� a flat)� Configuration of this component is
obligatory in the Netherlands. The standard setting for a DucoBox is as a low-rise home for 4 (or more) occupants�
Setting type of home
Ensure that 'Installer Mode' has been activated (via the 'INST' button)�
1
Press 'LOW' for a low-rise or 'HIGH' for a high-rise home�
2
The yellow LED (see illustration) will flash in a pattern that indicates the
number of occupants: Once, twice (applies for 3 occupants as well) or 4
3
times (applies for 4 occupants or more)� Press 'LOW' or 'HIGH' respectively
again until the LED pattern matches the correct number of occupants�
Press the 'INST' button to exit 'Installer mode'�
4
RED (blinking slowly)
Not in network
GREEN (blinking slowly)
In network
Component is displayed if changes are being put through via the master�
DucoBox� Follow the guidelines in '10 essential tips' if the problem recurs continually�
In network, waiting for associated components
YELLOW (on) Initialising (system
WHITE or OFF
Normal
BLUE
ORANGE
L2000651 Installation guide for DucoBox Silent (Revision M | 17.07.2019)
RED (blinking rapidly)
Logging in
GREEN (blinking rapidly)
configuration in progress)
HIGH
or
LOW
INST
ENGLISH
7