ANYTEC 868 CAB Manual - Página 11

Procurar online ou descarregar pdf Manual para Barco ANYTEC 868 CAB. ANYTEC 868 CAB 16 páginas.

Manual Anytec 868 CAB

3.10. Helm

The console is made of aluminium, the seats are water-repellent. We recommend that you

always use seat protectors and a console cover when your boat is not in use. The pilot's view

from the helm can be restricted due to a large trim angle, as well as other factors listed below:

 The load and position of the load;

 Rapid acceleration;

 Increase in speed from displacement speed to planing;

 Sea conditions;

 Rain and spray;

 Darkness and fog;

 Disruptive lighting;

 People or moveable items in the field of vision.

O- check the function of seats and supports at regular intervals

O- pay attention to the instruments

3.11 Main Engine

Max 2x400 horsepower and a total maximum weight of 618 kg. See the separate manual for

the engine with regard to its care, maintenance and operation.

The rigging is extra long. We recommend double nuts for engine mounting. It is important to

make sure that the lower bolt holes are sealed. The engine mountings must be checked after

about 20 hours of operation (NOTE: Tighten the engine bolts). To improve the overall

performance of the boat, it is important to ensure that the engine and propeller are raised

correctly so that the engine speed falls within prescribed limits. Speak to your dealer if

anything appears to be incorrect. For other data and maintenance instructions, see the engine

manual.

O- pay caution and be considerate as regards exhaust emissions and engine noise in

harbours. Spilt fuel and oil must not be allowed to escape into the water

For additional data and maintenance, check the engine manual.

3.12 Trim tabs

The boat is equipped with trim tabs as standard and those are operated via the panel on the

steering pulpit. Make tests in the operation of the boat to learn how trim tabs & boat reacts.

Anytec recommends using tabs at the beam seas, head sea and offset load. For operation and

maintenance of trim tabs, refer to the manual for these.

3.13 Ventilation

Stowage spaces and the hull is ventilated. Replace any damaged valves.

Anytec Sweden AB

Magasinsgatan 7

903 27 UMEÅ

0770-220 210

https://www.boat-manuals.com/

2017 (REV A)

- 11 -