DUCTMATE REPEATER 4200 Manual de operação e manutenção - Página 7
Procurar online ou descarregar pdf Manual de operação e manutenção para Ferramenta eléctrica DUCTMATE REPEATER 4200. DUCTMATE REPEATER 4200 12 páginas.
Imprimir páginaO P E R A T I N G T H E T O O L C o n t .
Adjusting Depth:
The depth that the fastener is driven can be adjusted using the depth adjustment next to the trigger of the tool.
WARNING: To reduce risk of serious injury from accidental actuation when attempting to adjust depth, ALWAYS;
Clearing a Jammed Fastener
Should a pin jam occur, disconnect air supply from tool, keep the tool pointed away from you and follow these
instructions to clear. If the tool jambs, do not continue to fire the tool. This cause the driver blade to break.
1.
To drive the nail shallower, turn the wheel (A) to the
right to the extent desired.
2.
To sink a nail deeper, turn the wheel (A) to left to the
extent desired.
3.
Make sure that the trigger and safety move freely up and
down without binding or sticking after each adjustment.
1.
Press down the door latch and swing the door.
2.
Insert the rod into the nose to push the pin back up
and into the guide body bore.
3.
Remove the jammed pin from driver channel.
4.
Extract the pin with pliers or, if the pin is loose, turn
the tool upside-down and shake it out.
7.