Dudek Techno Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de segurança Dudek Techno. Dudek Techno 19 páginas. Light harness with a pod

! !

If you are installing the rescue chute for the first time, it is necessary to run a test opening, to make sure the

container was correctly closed and to get familiar with required release force. In order to do that hang the harness, sit

in it, grab the release handle and pull it vigorously away from the frontcontainer. When running this exercise it is not

recommended to throw the rescue away, as it will result in opening the canopy bag. Pack the chute into the

frontcontainer again.

The rescue chute must be periodically aired and repacked according to its manual. Recommended equipment for the

Techno harness are the Globe 120 or Globe 90 rescue chute, manufactured by Dudek Paragliders. Installation of

many other parachutes (including steered reserves) is possible, as long as they fit in the container.

! !

To avoid accidental opening of the rescue system, pins closing the container must be checked before each

flight!

The frontcontainer has a Velcro strap on its top to hold the instruments. If the instruments are placed at an

unconvenient angle, you can use an additional instrument panel (included). The panel has an elastic cache on the

underside (you can place e.g. auxiliary powerpack in it) and another pouch for a safety knife on the front.