DUDOFF C04-M1 Manual de instruções de instalação e utilização - Página 6

Procurar online ou descarregar pdf Manual de instruções de instalação e utilização para Hob DUDOFF C04-M1. DUDOFF C04-M1 12 páginas. Built-in ceramic hob

Imprimir página

INSTRUCTION FOR THE USER

Cancelling the heat-up function

Touch the (-) (Key 1) sensor while the heat-up

function is ON to cancel it. The cooking level goes

down.

When the heat-up function is cancelled, there

is a sound signal and the decimal point on the

display goes out. It shows blinking an "H" with

the cooking level 0, when the temperature of the

heating-element reaches 65°C. It appears fixed if

the touch control is switch-off.

Setting the Key Lock function

Keep the Key Lock (Key 10) sensor pressed to

activate/cancel the keyboard locking function. If the

LED (11) associated with the Key Lock sensor is

on, the keyboard is locked.

The locking function can be activated when the

cooking levels are activated or when the cook top

is off. If the cook top is on, the Key Lock function

locks all the sensors except the On/Off (Key 6)

general sensor and the key lock sensor. When

the cook top is turned off, the Key Lock function

blocks all the sensors, including the general On/Off

switch, except the key lock sensor.

Cancellation of the Key Lock function

If the keyboard is locked (the LED (11) associated

with the Key Lock (Key 10) sensor is on), keep the

Key Lock sensor pressed for 1 second to cancel

the locking function and the indicator light will go

out.

Residual heat indicators

While the temperature on the cook top glass

surface is above 65°C, this condition will be shown

in the associated display, by means of an "H".

If the cook top is switched off, residual heat is

shown by a static "H" in the display. If the cook

top is on, but the power level is 0, the associated

display will show alternately "H" and "0".

To generate a temperature above 65°C a heating

element has to be in operation for a certain time,

which depends on the selected power level. Once

this time is passed, the residual heat warning will

come into operation when the element is switched

off.

If the minimum time needed to exceed 65°C is

over, the length of time the residual heat indicator

remains in operation is a function of the time the

element has remained turned on at a certain power

level.

Safety auto-power-off

If the power level is not changed for a present time,

the element in question will automatically be turned

off. The maximum operating time of an element

dependson the cooking level selected.

POWER

LEVEL

Thermal protection of the control panel

When the control panel detects an ambient

temperature above 96°C it turns off the nearest

element (selected by software), and an "H" for

residual heat shows in the associated display.

An element turned off by the thermal protection

can only be re-activated when the temperature

falls below 89°C.

Timer operation

The timer is activated by pressing the (+) or (-)

(Key8) timer sensors. It can be set to any value

between 1 and 99 minutes and can modifies at any

moment. To cancel the timer, select the <00> value

using the (-) timer sensor or switch it of by pressing

the (+) and (-) timer sensors simultaneously.

The timer can be customised to suit the needs of

the user by configuring the following options:

• Increase of timer value (1 min.).

• Timed heating element (programmable).

• Indication of timed heating element.

• Duration of the acoustic alarm (1 min.).

• Default initial timer value.

• Timer-Alarm mode.

MAXIMUN TIME OF

FUNCTIONNING (HOURS)