Concox Baby Bear GK301 Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Telemóvel Concox Baby Bear GK301. Concox Baby Bear GK301 12 páginas. Baby bear children mobile phone
Imprimir páginaturn, when the device is in ring mode.
Operation method: Press combination key (4+SOS) within 3sec when the device is in ring
mode, the device will enter into vibrate mode automatically. Press combination key for one
more time, the device will enter into silent mode.
4.9 Call volume adjustment
Shortly press 1 button for one time to increase one level of call volume when it
is calling. After volume reach the minimum, 5 key indicators will turn on
together.
4.10 Restore factory setting
Send SMS via any cellphone:
FACTORY#
to set all parameter to factory value. Once
received "OK", it succeeds.
e.g.: FACTORY#
5 SOS emergency call
Press SOS button for more than 3s to activate GPS automatically. Twice vibration will be
happened, then the device will send a LBS locating sms to the specific number,
e.g.:"Emergency call(LBS): nearby Bao'an Road Bao'an District, Shenzhen, Guangdong
(22.571,113.876)". Then it will dial the specific numbers by cycle, if there's no response
after all the number been dialed for three cycles, it will stop. After dialing the specific
numbers, if GPS is located, the device will send an accurate address information, e.g.:
"Emergency call(LBS): Bao'an Road, Bao'an District, Shenzhen, Guangdong
(N22.57139,E113.87710)". If GPS is not located in 5 minutes, the device will not send the
accurate address information.
Notice: To realize this function, please set special numbers first.
6 GPS locating function
GPS will be activated automatically with flashing Blue LED after power on the device, If
GPS is located within 5 minutes, GPS LED keeps in solid bright and the device will send
accurate address information to the server, then the GPS will be off automatically. If GPS
is not located after 5 minutes, GPS will be off and the blue LED will in dark state.
GPS will turn off after 5 minutes if the device stays in the area without GPS signal cover.
At this time, GPS timing locating function will be activated. The default time interval is 30
minutes. The GPS will start updating data every 30 minutes.
7. Check location
7.1 Checking via call
When one of the 4 specific numbers call the device, hanging off the call when it rings 1-3