Anywire DB A40 Series Manual - Página 5
Procurar online ou descarregar pdf Manual para Cabos e conectores Anywire DB A40 Series. Anywire DB A40 Series 15 páginas. Link connector insulation displacement method of flat cable
Imprimir página
1 1 1 1 Introduction
Link Connector is an IDC (Insulation displacement contact)-type connector for use as
"adding" or "branching" connections with the same connector combinations for a dedicated
flat-type connector.
Basically, IDC pliers must be used with this connector.
However,
dedicated tools
pliers.
The finish （coupling of housing or contact）may be different depending on the worker's
experience or the number of processing when using pliers.
For safety we recommend that dedicated tools be used if user is inexperienced, even if
performing multiple processing as shown in this manual.
Please refer to this manual as an additional manual separate from "pliers insulation
displacement work", a standard work method, introduced in AnyWire Technical manual or
laying Manual.
2 2 2 2 Subject to combination
Flat cable
Link Connector
！ ！ ！ ！
CAUTION
※Please confirm specifications and select adaptable link connector for cabtyre before you
use. For more details, refer to the 3Mwebsite.
for Insulation displacement work can be purchased instead of
（FK4-075-100 ：AnyWire model）
（LP4-BK-10P ：AnyWire model）
（38104-0018-000FL : 3M model）
Do not use other than above combination.
Otherwise, connection faire may occur.
（According to 3M catalog）
2-1