Duerkopp Adler 506 Manual de Instruções - Página 8

Procurar online ou descarregar pdf Manual de Instruções para Máquina de costura Duerkopp Adler 506. Duerkopp Adler 506 17 páginas.
Também para Duerkopp Adler 506: Manual de instruções de instalação (8 páginas)

Imprimir página

2.3 Threading the Needle Thread

Caution Risk of Injury !

Turn the main switch off.

Thread the needle thread only with the unit turned off.

The threading of the needle thread occurs as shown in the pictures

alongside in increasing numerical order:

–

Place the yarn roll on the yarn stand.

–

Thread the thread through the holes 1 of the yarn stand.

–

Thread the thread through thread guide 2.

–

Lead the thread through between the tension disks of the first

needle thread tension 3.

–

Thread the thread consecutively through thread guides 4 and 5.

–

Guide the thread through between the tension disks of the second

needle thread tension 6.

–

Thread the thread consecutively through the hole in the thread pull

7 and thread guide 8.

–

Wind the thread from the bottom approx. two times around the

thread roller 9.

–

Guide the thread through the thread controller spring 10.

–

Guide the thread under the thread guide 12.

–

Open the head cover.

–

Thread the thread through the hole in the thread lever 13.

–

Guide the thread through the hole in the thread control plate 14.

–

Insert the thread from the side into the thread gripper 15.

–

Thread the thread through the thread guide 17 on the needle bar.

–

Thread the thread from the front to the back through the eye of the

needle.