2connect CTSSU008.2 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Equipamento de gravação 2connect CTSSU008.2. 2connect CTSSU008.2 4 páginas. Steering wheel control interface for subaru vehicles
Imprimir páginaPRIOR TO INSTALLATION
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture
and away from heat sources. Please ensure that the correct tools are using during the installation to avoid damage to the vehicle or prod-
uct. Connects2 can not be held responsible for the installation of this product.
WIRING KEY
Purple
Purple/Black
Green
Green/Black
Grey
Grey/Black
White
White/Black
STEERING WHEEL CONTROL FUNCTIONALITY
The following diagram, though based on careful research, is an example only. Individual steering wheel control configurations may differ.
INSTALLATION GUIDE
Take the 14-way connector on the vehicle interface harness and plug this into the relevant connection on the side of
the interface.
Attach the antenna adapter to the vehicles pre-existing connection.
Remove the vehicles exisiting USB interface and replace the circuit board within the origianl hosuing using the re-
placement provided. This will provide support with your new aftermarket radio (See page 4 for more information).
Connect the male yellow RCA to the 'reverse camera input' on the back of the new stereo.
Attach the additional wiring on the harness to the back of the stereo:
Pink - Speed Pulse Green - Park Brake Purple - Reverse
Right Rear Speaker +
Right Rear Speaker -
Left Rear Speaker +
Left Rear Speaker -
Right Front Speaker +
Right Front Speaker -
Left Front Speaker +
Left Front Speaker -
Yellow
Black
Red
Orange
Green
Pink
Purple/White
Blue
Blue/White
Button Function -
1. Info
2. Arrow Up
3. Select / Set
4. Arrow Down
2
Permanent 12V
Ground
Ignition 12V
Illumination
Park Brake
Speed Pulse
Reverse Gear
Amp Remote
Remote Output
CTSSU008.2