Anzzi VT-MR3SCCT30-GY Manual de instalação e operação - Página 6
Procurar online ou descarregar pdf Manual de instalação e operação para Mobiliário de interior Anzzi VT-MR3SCCT30-GY. Anzzi VT-MR3SCCT30-GY 8 páginas. Bathroom vanity
Imprimir página
GUIDE TO MOUNTING THE CABINET ON THE WALL
1
A
INSTALL THE MOUNTING PLATE AT
YOUR DESIRED HEIGHT. MEASURE
FROM THE EDGE OF THE
FLOOR UP
2
WITH TWO OR MORE PEOPLE LIFT
THE CABINET UP ONTO THE MOUNTING
PLATE.
3 Regulations
Height
7/16"
Front
3/4"
Side
5/16"
7/16"
3 /4 "
MAKE SURE THAT THE HANGERS ARE
COMPLETELY ATTACHED TO THE PLATE
AND THEN ADJUST THEM IF NECESSARY
B
2 6 5 m m
(1 0 3 /8 "
)
MARK A HORIZONTAL LINE WITH THE
MEASUREMENTS IN THE DRAWING,
MARK THEM WITH AN X
A
C
ATTACHING THE MOUNTING PLATE
INSERT 3 ANCHORS PER MOUNTING
PLATE WHERE THE X ARE USING A DRILL
WITH A HEXAGONAL BIT
HANG THE CABINET ON THE WALL
LEVEL THE CABINET.
INSTALL THE DOOR AND PLACE
THE HANGER COVERS OVER
THE HANGERS.
C
WITH THE LEVEL OVER THE MOUNTING
PLATES MAKE SURE THAT THEY ARE
LEVELED ON BOTH SIDES.
B
D
50136+20333 - 2 of 2
D
Lot No: