Danco GoBidet 2003 Manual de início rápido - Página 5

Procurar online ou descarregar pdf Manual de início rápido para Ferramentas Danco GoBidet 2003. Danco GoBidet 2003 6 páginas.

Shower head assembly (Part no. 2003.01) will not move with

someone sitting on the toilet:

Did you use the included spacer (Part no. 2003.11) on the

side of seat without the GoBidet™ (Step "D.2")? Call us at

1.888.GOBIDET for more spacers.

ii.

If you cannot find taller, attachable bumpers, you may need

a new toilet seat with taller bumpers or one with less seat

contour.

GoBidet™ moves too much when manipulating the controls:

Snugly tighten threaded bushing (Step "B.4").

Firmly tighten chrome nut holding GoBidet™ to mounting

ii.

bracket (Part no. 2003.09).

In some cases, you may need to also use a strong double

iii.

sided tape between the mounting bracket and the bowl

We recommend 3M industrial, double-sided tape.

GoBidet™ sprayed someone's face or the ceiling:

"Operator error!" Must have a different target above shower

head!

¹Removal of toilet seat is usually easily accomplished by popping open the plastic

screw covers behind the seat using a flathead screwdriver and unscrewing the

screws. However, in the event that the screws are corroded metal and not plastic,

they may be difficult to remove using a traditional screwdriver, even when using a

lubricant. In this case you should utilize a hacksaw blade or bolt cutter to cut the

screws from the toilet. Be sure to protect your toilet from abrasion if a hacksaw is

used.

Regular Water Connection