Duevi EZY-LAN HW 4A Manual do instalador

Procurar online ou descarregar pdf Manual do instalador para Sistema de segurança Duevi EZY-LAN HW 4A. Duevi EZY-LAN HW 4A 13 páginas. Wireless alarm panel with ethernet + wi-fi + gsm + lte

Imprimir página

EZY-LAN Wireless alarm panel with Ethernet + Wi-Fi + GSM + LTE

Identification of the parts

FRONTAL VIEW

1 – led power

2 – led Ethernet

3 – led Wi-Fi

BOTTOM VIEW VERSION HW 3B

BOTTOM VIEW VERSION HW 4A/4B

8 – button PWR

9 – button RJ45

10 – nanoSIM housing

4 – led GSM + LTE

5 – programmable central button

6 – multicolor led ring

11 – power supply input 12Vdc

12 –button PRT (internal)

EZY-LAN 22.07-M:3.1-H:3b/4a/4b-F:3.3.4+

Wall mounting

The control panel is equipped with a wall

mounting bracket, which also integrates the

housing for the anti-removal tamper magnet.

PLEASE NOTE

The anti-removal tamper function is

available starting from the HW 4B version

To mount, proceed as follows:

1. Use the bracket as a template for the holes

2. Drill two 5mm diameter holes on the wall at the

points (13)

3. (IF TAMPER PROTECTION NECESSARY)

Make a 6mm diameter hole 20mm deep on the

wall at point (15)

4. Fix the wall bracket with the supplied plugs

through the holes (13)

5. (IF TAMPER PROTECTION NECESSARY)

Insert the magnet supplied in the appropriate

hole in the bracket (15)

6. Insert the control panel on the bracket

matching the slots on the bottom with the

appropriate supports (14), then move the

control panel downwards until it stops.

13 - holes for wall plugs

14 – control panel supports

15 - hole for magnet (optional)