Dancover ProShed Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Tenda Dancover ProShed. Dancover ProShed 17 páginas. Size 5x8m

SAFETY AND HAZARD INSTRUCTIONS

CAUTION

: Read the following safety warnings and all instructions in their entirety prior to installation.

WARNING:

Metal parts may get hot when exposed to high heat or direct sunlight. Avoid contact with skin and wear protective gloves

and clothing to prevent the possibility of burns.

WARNING:

Metal conducts electricity and electrical shock hazards exist since the structure is made of metal. During installation or storage,

keep the structure and all components away from electrical sources. Make sure that your selected location is away from power lines,

underground cables, and any other source of electrical power. Serious injury or even death may occur if contact is made with electrical current.

WARNING:

If the structure is moved once it has been installed, be certain to inspect all components and conditions and follow each and every step of

these instructions to make certain that the structure is securely anchored, properly installed, and aligned. Failure to follow these steps

could lead to collapse of the structure and may result in serious risk of injury.

WARNING:

In the event that your structure is enclosed, be sure to provide proper and adequate egress and ingress.

Hazardous, poisonous or noxious substances should not be stored in the structure and the following all warnings

and instructions of the manufacturer of the substance. Also, proper ingress and egress should be provided to prevent persons

or children from becoming trapped inside the structure.

WARNING:

The product metal panels are selected to cover all or a portion of your structure, be careful of the sharp edges which may cause cuts

or lacerations. Wear protective work gloves and suitable clothing for protection and always take care when handling metal parts.

WARNING:

Always wear safety glasses or goggles when installing self-drilling screws.