Cascade 80R Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Empilhadores Cascade 80R. Cascade 80R 18 páginas. Integral mount sideshifter, sideshifting fork positioner

Imprimir página

PERIODIC MAINTENANCE

Daily

Check items shown each day. Report problems to your

supervisor. Refer to service manual for troubleshooting,

maintenance and repair procedures.

• Check for loose or missing capscrews, worn or

damaged hoses, and hydraulic leaks.

1000-Hour

Every time the lift truck is serviced or every 1000 hours

of truck operation, whichever comes first, complete the

following maintenance procedure:

• Apply chassis grease to the frame upper and lower

grease fittings and fork or carrier bearing grease

fittings.

• Tighten fork carrier retainer capscrews to 165 Nm.

• Tighten the fork position cylinder rod anchor nuts to

320 Nm.

• Tighten the fork position cylinder base anchor nuts to

450 Nm.

• Tighten the sideshift cylinder capscrews to 105 Nm.

• Inspect the fork or carrier upper and lower bearings

for wear or damage. If bearing thickness is less than

1.5 mm, replace the bearings.

Upper

Bearings

Sideshift

Cylinder

Lower

Bearings

6914838 EN

Frame

Upper

Grease

Fittings

IN0021.eps

Frame

Lower

Grease

Fittings

WARNING: After completing any service

procedure, always test the fork positioner

through five complete cycles to make sure

the attachment operates correctly before

returning it to the job.

Fork Position

Cylinders

Valve

IN0020.eps

Fork Carrier

Retainer

Capscrews

IN0031.eps

Cylinder Rod

Anchor

Fork or Carrier

Bearing Grease

Fittings

Cylinder

Base

Anchors