Dancover COMMERCIAL TITAN Peak 240 8.82m2 Manual - Página 5

Procurar online ou descarregar pdf Manual para Kit de estufa Dancover COMMERCIAL TITAN Peak 240 8.82m2. Dancover COMMERCIAL TITAN Peak 240 8.82m2 16 páginas.

Imprimir página
Technical certificate
Тable 4
Extra package insert
Ridge shape
Top draw band
Bottom draw band
Top arc base sheet
Bottom arc base sheet
Outermost base sheet for a runner
Tingle
Main shape
Washer 32х6
Bolt М6х14
Bolt М6х20
Bolt М6х60
Nut М6
Washer 6
Double-size scotch tape

WARRANTY LIABILITIES

It is not allowed to install the greenhouse without fastening on the ground because
of the large sail area of the greenhouse and the possibility of floating away the
1. The manufacturer bears responsibility for the greenhouse frame complete
setup.
2. The manufacturer bears responsibility for the greenhouse
assemblability in accordance with the manual.
3. The manufacturer bears responsibility for the greenhouse durability under
specified magnitude of atmospheric actions.
4. Claim presentation period is 12 months from the date of purchase.

Warranty conditions

Warranty liabilities do not apply to cases of:
1. Greenhouse installation with violation of requirements of the manual.
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Floods, hurricanes and other natural disasters.
The manufacturer reserves the right for greenhouse engineering design changes.
6
1
1
2
2
2
2
20
2
12
34
12
2
48
50
1
unfastened greenhouse.
2,10
8,42
0,60
The greenhouse should be serviced in the winter period. The greenhouse has
1,67
durability under the action of snow loads way more than is required for greenhouses,
2,91
but less for some snow areas in comparison with the general construction standards.
2,04
According to SNiP 2.10.04-85 «Greenhouses and seedbeds» «weight of snow blanket
0,09
on 1 m2 of horizontal surface of the ground in design of static greenhouses...»
2,10
should be taken from 10 to 40 kg/m2 depending on a snow region. This is much
less than the general construction standards for snow load, because it is assumed
that on the current greenhouses a snowcap is not preserved until the next snowfall.
According to the results of strength tests the limits of durability of the greenhouse
frame are revealed: destroying snow load is 240 kg/m2, permissible load (with safety
coefficient 1.4) – 180 kg/m2. The permissible load approximately corresponds to
the thickness of fresh snow 0.9 m and settled snow 0.45 m.
5 м
If the greenhouse is not heated in winter, or it is supposed to use the greenhouse
as an unheated housing, awning, warehouse, etc., it is necessary to control the
snowcap (to shift the snow down with a wooden or plastic scraper, installed on a
pole). For these variants of operation it is possible to supply reinforced frames with
a reduced interval between the power arcs under the snow load specified by the
customer.
Do not allow damage to the frame, and if it happened, then hold timely repairs.
Cleaning and washing of polycarbonate sheets.
1. Rinse sheet with warm water.
2. To remove dirt, wash it with mild soap solution or domestic detergent using a soft
cloth or sponge.
3. To remove water, rinse the sheet with cold water and wipe it with a soft cloth.
Never use abrasives or high-alkali detergents for cleaning
polycarbonate sheets. Dry wiping damages covering layer of
the covering and shortens its service life. Never rub surface of
polycarbonate sheets with a brush, metalized fabric or other abrasive
materials.

RULES OF OPERATION

Do not use sulphur cartridges for disinfecting greenhouse
against fungal and bacterial agents in order to prevent
corrosion (darkening) of the frame.
Manual
7