Abu Garcia EliteMax Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de pesca Abu Garcia EliteMax. Abu Garcia EliteMax 7 páginas.

Abu Garcia EliteMax Manual do utilizador
HOW TO FILL THE SPOOL WITH LINE
All Max™ spinning reels are designed for monofilament, braid and fluorocarbon lines. Personal preference and fishing conditions will determine line selection.
Mono and Fluorocarbon lines
1) Attach reel to rod and pass the line through the rod guides. Lift up on the bail wire to open the bail. Secure the line to the reel using the arbor knot. Pull line
tight around reel spool.
(CLICK HERE
to learn how to tie the arbor knot in this video)
2) Control the filler spool by inserting a pencil into the spool hub. While maintaining tension on the line, wind the reel handle and continue to fill with line to
approximately 1/16" (1.5 mm) inside the upper lip of the reel spool (show picture). Do not overfill.
how to tie the uni-to-uni knot in this video)
Braided lines
Some anglers prefer to add a monofilament backing to the reel spool before attaching braided line. This helps reduce line slip. Using the above instructions,
fill the spool with enough monofilament line to cover the spool. Tie the tag end of the monofilament backing to the braided line using a uni-to-uni knot,
Albright knot or equivalent. Continue to fill the spool with braid to approximately 1/16" (1.5 mm) inside the upper lip of the spool. Do not overfill.
(CLICK HERE
to learn how to tie the uni-to-uni knot in this video)

HANDLE ASSEMBLY

Your Max™ spinning reel can be configured for right or left-handed operation. To convert, unscrew the handle by rotating it counter clockwise (right).
Unscrew and remove the handle knob cover on the opposite side of the reel. Insert the handle into the opposite side of the reel and rotate it clockwise (left)
until it is firmly seated. Reinstall the handle knob cover on the opposite side of the reel.
MAX X
Unscrew the handle cap by rotating it counter clockwise (Left). remove the handle and insert onto the other side of the reel. Then place the handle cap on
the opposite side of the handle and screw clockwise untill tight.
ANTI-REVERSE
The anti-reverse feature prevents the rotor from turning backwards. To engage the anti-reverse feature, slide the switch to the "On" position. To turn off this
feature, slide the lever in the opposite direction. In the "off" position, the rotor will turn both forward and backwards depending on what direction the handle
is turned. Available on Elite Max only.
MAX FAMILY LP MANUAL
abugarcia.com