Airviz speck Manual de configuração

Procurar online ou descarregar pdf Manual de configuração para Monitor Airviz speck. Airviz speck 2 páginas. The indoor air quality monitor

Place the Speck on a

flat, hard surface, away

from direct sunlight

Try to ensure the Speck screen is visible at all times

Connect the micro USB

end of the cable to the

Speck's micro USB input

The Speck is manufactured under license from Carnegie Mellon University

Setup Guide

Make sure there is nothing

blocking the air intake at the

bottom of the Speck

Connect the cable to the

USB power adapter and

plug into a wall outlet

Your Speck Data

You have complete ownership and control over

your Speck data! We offer tools that enable you to

explore, analyze and share your data as you see fit.

Choose one of two ways to access your Speck data:

1. Periodic data download to a personal computer

2. Continuous data upload to the cloud

Note: Your Speck can store up to about 2-years of data on the

device itself. However, each time you download or upload data, that

information will be removed from your Speck's onboard memory.

To register your Speck and explore your data:

1. Visit: specksensor.com/software

Note: Check out our video tutorials when you visit this site!

2. Download and install our free Chrome Speck app

Note: Chrome is only required for this initial setup. Your Speck data

can then be accessed through any web browser.

3. Connect your Speck to your computer via the USB

cable and launch the app

4. Choose to either download your data OR

configure your Speck to upload data to the cloud

5. Quit the app and explore your air quality!