Duke AHPO-6/18 GOLD Manual de instalação e serviço - Página 10
Procurar online ou descarregar pdf Manual de instalação e serviço para Forno Duke AHPO-6/18 GOLD. Duke AHPO-6/18 GOLD 16 páginas. Proofer oven
Também para Duke AHPO-6/18 GOLD: Manual de instruções (15 páginas)
Imprimir página
DUKE PROOFER OVEN
Door Gasket Leak Adjustments
The doors should be checked for leaks every three months. The adjustment can be
made by following the instructions below. If the door gasket is damaged, or
compressed permanently, it should be replaced. Call Duke Manufacturing Co. at 800-
735-3853 to order a new gasket before making adjustments.
1. With the door closed, remove the
hinge covers with a screwdriver and
loosen the six screws that hold the
hinges to the door.
2. Adjust the door position by moving
the door frame in or out to seal any
gaps between the gasket and the
oven front. Be careful not to
compress the gasket too much, it
will cause the door to bind up on the
hinge side.
3. When the door is positioned, tighten
the hinge screws.
4. Loosen the two screws that hold the
door handle in place.
5. Adjust the door position by moving
Door Hinge Screws
REVISED:
June 15, 2005
Door Adjustments & Gasket Maintenance
the door frame in or out to seal any
gaps between the gasket and oven
front.
6. When the door is positioned, tighten
the door handle screws.
7. To check the adjustment, close the
door with a dollar bill between the
gasket and front of the oven. You
should feel resistance when you try
to pull the dollar bill out with the
door closed. Do this check in several
places and readjust the door if
necessary.
Door Handle Screws
DUKE PROOFER OVEN
DUKE MANUFACTURING CO.
TOLL FREE 1-800-735-DUKE(3853)
10 of 16
1-314-231-1130
RESTAURANT
EQUIPMENT
MANUAL
Move Door to adjust gap