airwave Air Boy nano4 Manual de instruções de funcionamento - Página 12

Procurar online ou descarregar pdf Manual de instruções de funcionamento para Aeronaves airwave Air Boy nano4. airwave Air Boy nano4 20 páginas.

OPERATING INSTRUCTIONS

4. Adjustment working time

Working time presetting: Long press the "STOP" button to enter the run time preset mode

(00:01 to 99:59min), the temperature "+" and "-" buttons refer to minutes; the air volume

"+" and "-" buttons refer to seconds. Please press the "STOP" button to save and exit the

data

1. Before presetting the run time, please estimate the amount of film on the roll

and set the time accordingly so the machine does not run out of film during

the run as this could potentially cause machine damage.

2. Run time can only be set before the "START" button is pressed. The air

volume, speed and temperature may all be adjusted while the machine is

running.

3. The machine will automatically save the settings when it is powered down.

Example: Full roll AirWave Standard 9.7.1 (1150m) lasts:

V4 (32,8ft/min) - 35min

V3 (26.2ft/min) - 44min

V2 (19.7ft/min) - 59min

V1 13.1ft/min) - 88min