Dulux RapidFish D500 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Pulverizador de tinta Dulux RapidFish D500. Dulux RapidFish D500 20 páginas.
Imprimir páginammJI
0500 Rapid
Finish
spray system manual
5. COATING MATERIALS
Suitable for use
Not suitable for use
•
Water- and solvent-based paints
•
Finishes
•
Primers
•
Two-component
paints
•
Clear
finishes
•
Staining sealers
•
Wood sealer-preservatives
Table 1:
Coating materials
•
Materials that contain highly abrasive
components
•
Highly
alkaline and acidic paints or
materials with high viscosity
•
Flammable
materials with a flash
point
below
23°C
(refer
coating
manufacturer's Safety Data Sheet]
6.
PREPARING
THE COATING MATERIAL
8
The
spray attachment provided with the Rapid Finish device can be used
to
spray paints
and varnishes that are undiluted or slightly diluted.
Detailed information
regarding
which paints and varnishes are suitable for spraying
is
available
from the
coating
manufacturer.
You should consult with your coatings
manufacturer as to whether
its products
are suitable for
use
in
the Rapid
Finish device.
To
prepare the coating material for spraying:
1.
Stir the material and put the
required
amount
into
the paint container
[figure
1,
item
10]
2.
If
the
flow rate
is
too low, dilute the sprayed material with an appropriate
th
inning
agent starting with
5%,
gradually
increasing
to
10%
until
the flow
rate
meets your
requirements.
Sprayed material
Dilution
Varnish
Undiluted
Wood
prese
rvat
ives, mordants,
oils,
Undi
lu
ted
dis
infect
ion
agents,
plant
protective
agents
Paints
containing solvents and
Dilute
by
5-10%
water-soluble paints, primers and
thick-film varnishes.
Table 2: Thinning recommendation