Danfoss Holip HLP-V Series Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Accionamentos DC Danfoss Holip HLP-V Series. Danfoss Holip HLP-V Series 10 páginas.
Imprimir página
Maximum load to ground (terminal 39) at analog output
Accuracy of analog output Max. error: 1.5% of full scale
Resolution on analog output.
Reliable galvanic isolation: All digital and analog outputs are galvanically isolated from the supply voltage
(PELV)*, as well as other inputs and outputs.
Control card, 24 V DC supply
Terminal no.
Max. load (short-circuit protection)
Terminal nos. ground
Reliable galvanic isolation: The 24 V DC supply is galvanically isolated from the supply voltage (PELV)*, but
has the same potential as the analog outputs.
Control card, RS 485 serial communication:
Terminal no.
Reliable galvanic isolation: Full galvanic isolation.
1)
Relay outputs:
No. of programmable relay outputs
Terminal nos., control card (resistive load only)
Max. terminal load (AC1) on 4-5, control card
Max. terminal load (DC1) on 4-5, control card
Max. terminal load (DC1) on 4-5, control card for UL/cUL applications
Terminal nos., power card (resistive and inductive load)
Max. terminal load (AC1) on 1-3, 1-2, power card
Max. terminal load (DC1) on 1-3, 1-2, power card
Min. terminal load (AC/DC) on 1-3, 1-2, power card
1) Rated values for up to 300,000 operations.
At inductive loads, the number of operations are reduced by 50%, alternatively the current can be reduced by
50%, thus the 300,000 operations are maintained.
Brake resistor terminals (only with Brake units):
Terminal no.
External 24 Volt DC supply:
Terminal no.
Voltage range
Max. voltage ripple
Power consumption
Min. pre-fuse
Reliable galvanic isolation: Full galvanic isolation if the external 24 V DC supply is also of the PELV type.
8
HLP-V Series
24 V DC ±15% (max. 37 V DC for 10 sec.)
15 W - 50 W (50 W for start-up, 20 msec.)
68 (TX+, RX+), 69 (TX-, RX-)
50 V AC, 1 A, 50 VA
25 V DC, 2 A / 50 V DC, 1 A, 50 W
30 V AC, 1 A / 42.5 V DC, 1A
1-3 (break), 1-2 (make)
250 V AC, 2 A, 500 VA
25 V DC, 2 A / 50 V DC, 1A, 50 W
24 V DC, 10 mA / 24 V AC, 100 mA
500
8 bit
12, 13
200 mA
20, 39
2
4-5 (make)
81, 82
35, 36
2 V DC
6 Amp