DUNE BD Prime Manual rápido - Página 5

Procurar online ou descarregar pdf Manual rápido para Leitor multimédia DUNE BD Prime. DUNE BD Prime 8 páginas.

Before getting started

When you start using the media player for the first time, please make sure that the shipping packing is

not broken, has no compression or opening marks.

● If the packing was broken, the manufacturer shall not be held liable in respect of the integrity of

the package contents.

When you connect the media player to your AV appliances for the first time, please make sure that all

seals and retainer screws on the top enclosure are in place and contain no unsealing mark.

● If for some reason, the seals were broken, the manufacturer shall be entitled to refuse the free of

charge after-sales servicing of the device.

After switching on the player performs automatic booting procedure, including boot-up of embedded

operating system. It may take 30 to 60 sec. After that you will get to splash screen (Main root folder)

of the file browser.

Please do connect to relevant AV

appliances only if all devices are

switched off.

MODE button on the RC allows quick setting of video output without use of setup menu. This

type of video output configuration may be required in case that after connection of your player

to a TV or projector, you see no picture on screen (and no setup menu displayed accordingly).

After pressing MODE button you will enter quick setting mode of video output. Pressing one of the

digit buttons 1, 2, 3, 4, 5 right after that on your RC, you may switch to one of the following settings

of video output respectively:

1. Composite/S-Video/Component, PAL

2. Composite/S-Video/Component, NTSC

3. HDMI, 480i 60Hz

4. HDMI, 720p 60Hz

5. HDMI, 1080i 60Hz

To exit quick setting mode of video output after successful settings,

press ENTER on your RC.

● After pressing the MODE and a digit buttons please wait for up to 15

sec. before the new video mode is settled.

● The pointed five video settings are only to ensure that you can quickly

set up some usable video mode for any type of video connection you

are using, regardless the previous settings of your player.

● After getting picture on screen with one of these modes, please go

into Setup menu and choose the most appropriate video output and

resolution.

● During any video playback the MODE button is deactivated. To change

parameters of video output, stop playing back by pressing STOP but-

ton.

● In case of any problems, to make sure that the playback is stopped

and you are in file browser mode, switch Off and then switch On the

player and wait until player booting during up to 60 sec.